How To Clean Your Car's Engine Bay

Sprucing up the greasy bits can breathe new life into your car.

Andrew Ganz | 
Jul 8, 2022 | 3 min read

Car engine bayGetty Images

When dust and grime find their way under your car’s hood, they turn its once brochure-fresh engine bay into a tired-looking place. A cursory clean up every once in a while can help keep things looking nice, which also means it will be easier to spot leaks or other problem areas should they arise. Here’s how to clean an engine bay.

Choose the Right Products

There’s a big difference between cleaning your car’s engine bay and detailing your car’s engine bay. The latter implies paying close attention to every nook and cranny for the kind of beautiful shine that might win you points at a car show.

Most drivers will instead take a simpler cleaning approach, which is where a basic degreaser spray can come in handy. Griot’s Garage makes a degreaser that runs around $12 in spray bottle form, while Adam’s Polishes has a $10 multi-purpose degreaser that it claims is eco-friendly.

Degreasing sprays pair well with a soft-bristle brush, which can be used to agitate dirty surfaces. Chemical Guys sells an $8 boar’s hair brush that can be used on a variety of surfaces, though grease contamination means you’ll want a different brush for, say, the interior.

Otherwise, all you need is microfiber towels, tape, and plastic bags.

How to Clean Your Engine Bay

First off, don’t start with a hot engine. At a minimum, let the engine cool for 15 or 20 minutes to reduce surface temperatures so that you don’t burn yourself or risk cracking hot plastics by exposing them to big temperature swings.

Then disconnect your battery’s negative terminal using a wrench. Engine bays are designed to get damp—a little rainwater will inevitably find its way in, after all—but they are not intended to be soaked with high-pressure water. Look closely for any major electric components, such as a fuse box or computers. Gallon- and quart-size plastic bags can be secured over these items with tape to make them reasonably watertight.

Once those electronic components are protected, spray degreaser on areas that look particularly dirty and then gently agitate especially greasy or dusty areas with a brush. You can also use the degreaser and brush on the underside of the hood, even if there is an insulation pad.

After giving the degreaser a few minutes to activate, it’s time to use your hose. A garden hose with a spray nozzle will do the trick well enough, or you can use a pressure washer set to a low setting.

Protect Your Work

An engine bay dressing such as the $18 aerosol spray from Griot’s Garage can be used as a final touch that can protect surfaces, too.

Unless you spend a lot of time on dirt roads, you probably don’t need to schedule a regular engine bay cleaning. Still, when poking your head under the hood periodically to check fluids, take a look around the engine bay. If it looks dirty, perhaps block off an hour or two for another scrubbing.


Written by humans.
Edited by humans.

This site is for educational purposes only. The third parties listed are not affiliated with Capital One and are solely responsible for their opinions, products and services. Capital One does not provide, endorse or guarantee any third-party product, service, information or recommendation listed above. The information presented in this article is believed to be accurate at the time of publication, but is subject to change. The images shown are for illustration purposes only and may not be an exact representation of the product. The material provided on this site is not intended to provide legal, investment, or financial advice or to indicate the availability or suitability of any Capital One product or service to your unique circumstances. For specific advice about your unique circumstances, you may wish to consult a qualified professional.

Andrew Ganz

Andrew Ganz has had cars in his blood ever since he gnawed the paint off of a diecast model as a toddler. After growing up in Dallas, Texas, he earned a journalism degree, worked in public relations for two manufacturers, and served as an editor for a luxury-lifestyle print publication and several well-known automotive websites. In his free time, Andrew loves exploring the Rocky Mountains' best back roads—when he’s not browsing ads for his next car purchase.